FUTABA 16SZ Instruction Manual page 186

T18SZ / T16SZ / FX-36 SOFTWARE UPDATE CHANGES
1M23N30222
This software updates or alters the functions and features noted below. The instructions and information that follow are meant as a
supplement to the original instruction manual that accompanied the transmitter. Please refer to the original instruction manual where
applicable, but replace the steps indicated below with these instructions. Please check to ensure that the update has been installed.
1) Select the System Menu.
2) Touch the [Information] button.
3) Confirm that the information in the display indicates the version numbers as noted above.
1. Telemetry Airspeed sensor function
The T18SZ/T16SZ/FX-36 has been made compatible
with the telemetry airspeed sensor.
◆ Airspeed sensor is registered with the transmitter.
T18SZ
T16SZ
◆ How to display the Airspeed sensor screen.
① [Linkage menu] → [Telemetry]
② Tap [Speed sensor]
V3.5
*Airspeed sensor must be installed in the
aircraft.
FX-36
① Connect the sensor to the transmitter as shown in
the figure.
② [Linkage menu] → [Sensor] → [Page 3/3]
is opened from the transmitter.
Receiver
③ Tap [Register]
battery
④ Complete registration and remove sensor from
the transmitter.