FUTABA 16SZ Instruction Manual page 71

Servo Reverse
Servo Reverse changes the direction of an
movement.
For CCPM helicopters, be sure to read the
section on Swash AFR before reversing any servos.
With CCPM helicopters, always complete your
servo reversing prior to any other programming.
control multiple servos, it may be confusing to
tell whether the servo needs to be reversed or a
setting in the function needs to be reversed. See the
instructions for each specialized function for further
details. Always check servo direction prior to every
(The display screen is an example. The screen depends on the model type.)
Servo reversing procedure
After setting up a new model, be sure to
are plugged into the proper receiver channels.
channels by moving each stick and observing the
＜ Linkage menu ＞
72
model memory, hook ups, and radio function.
WARNING
Before a flight, always check that your
model's servo operation, the direction
of control surfaces, and switch setup
are correct.
Default setting of the throttle/motor
channel is always reverse.
Tap the channel you
wish to reverse.
Tap the "Yes"
→ Reverse