Throttle cut
Throttle cut provides an easy way to stop the
idle. The action is not functional at high throttle to
and direction must be chosen, as it defaults to " −
− " .
This is the throttle cut
position. Tapping this
will display value input
buttons on-screen. Set
the engine stop position.
Throttle cut setting procedure
Tapping this will pull up the
hardware selection screen.
Select the throttle cut switch
and ON-OFF direction.
Tapping this will change
INH to either OFF or ON
and activated.
This indicates the throttle stick's current
position. Throttle cut will only function
when the throttle stick is more than 1/3rd
into the slow throttle range.
(
*With throttle stick at idle, adjust the rate until the engine
consistently shuts off.
< Linkage menu >
The yellow line is the
cut position. When
the cut switch is ON,
the throttle will move
to this position.
)
(
)
81