Step 2: Set Up Your Handheld; Step 3: Install Software; Step 4: Connect The Hotsync Cable To The Computer - Palm Tungsten Tungsten E Handbook

Step 2: Set up your handheld

Press the power button to turn on your handheld.
a.
Power button
Stylus
If your handheld does not turn on, see
Slide the stylus out of the storage slot.
b.
Hold the stylus as you would a pen or pencil, and use it to follow the onscreen
c.
directions.

Step 3: Install software

After setting up your handheld, insert the Software Installation CD-ROM into
a.
your computer 's CD-ROM drive.
b. Windows:
Palm Desktop software.
Mac:
desktop, and then double-click the Palm Desktop Installer icon.
NOTE
computer running Windows 2000/XP or Mac OS X.

Step 4: Connect the HotSync cable to the computer

Locate the USB icon and ports on your computer.
a.
Plug the USB connector on the HotSync cable into a USB port on your computer.
b.
Follow the onscreen instructions, which guide you through installing
Double-click the Software Installation CD icon that appears on the
You need administrator rights to install Palm Desktop software on a
Step 2: Set up your handheld
"Operating problems" in Appendix B.
3