Palm Tungsten Tungsten E Handbook page 148

Chapter 13 Using Palm™ VersaMail™ Personal E-mail Software
To set outgoing mail options:
(Optional) Do any of the following:
1.
Display Name
Reply To Address
BCC
Tap Next.
2.
138
Enter the name you want to appear on your outgoing
messages, such as "Joe Smith."
Enter the e-mail address that you want recipients to see and
reply to on your e-mail messages, only if this is different
from the e-mail address from which you are sending the
message. For example, if you are sending a message from
me@yahoo.com but you want recipients to reply to
me@earthlink.net, enter the reply-to address here. Reply To
Address makes it look as though the e-mail came from the
address you entered.
Select the BCC check box to send a blind copy of any e-mail
message you send to another e-mail address. The blind copy
e-mail address is not seen by the other recipients of the
message. For example, if you want a copy of all messages
you send from your handheld to be sent to your corporate
e-mail account, enter that e-mail address.