Security Preferences - Palm Tungsten Tungsten E Handbook

Chapter 16 Setting Preferences for Your Handheld
To change the charging setting:
From the General Preferences list, select Power.
1.
Tap the On while charging pick list.
2.
Select Off to turn off your handheld when it is charging.
3.
Tap Done.
4.
Beam Receive
You can choose to turn off the Beam Receive feature. This prohibits anyone from
beaming information to your handheld. It also results in a slight saving of battery
power. By default, Beam Receive is enabled.
To turn off the Beam Receive feature:
From the General Preferences list, select Power.
1.
Tap the Beam Receive pick list.
2.
Select Off to disable receiving beamed information.
3.
Tap Done.
4.

Security Preferences

Security Preferences help you prevent unauthorized users from viewing entries
that you want to protect. Use Security Preferences to do the following:
Lock and turn off your handheld so that it does not operate until you enter the
correct password.
Mask all records that you mark as private so that the information appears as
gray bars.
Hide all records that you mark as private so that they do not appear on any
screen.
You can mask and hide private records with or without a password. Without a
password, private records are hidden or masked until you set Security Preferences
to show them. With a password, you must enter the password to view private
entries.
Assigning a password
You can assign a password to protect your private records and to lock your
handheld.
To assign a password:
From the General Preferences list, select Security.
1.
Tap the Password box.
2.
Enter a password.
3.
244