Tapping And Writing Problems - Palm Tungsten Tungsten E Handbook

My handheld is not making
any sounds.
My handheld has frozen.

Tapping and writing problems

Problem
When I tap the buttons or
screen icons, my handheld
activates the wrong feature.
When I tap the Menu icon
nothing happens.
I can't get my handheld to
recognize my handwriting.
Check the System, Alarm, and Game Sound settings.
See "Sounds & Alerts Preferences"
If a network connection was improperly terminated, your
handheld may appear to be frozen for up to 30 seconds. If it is
still frozen after 30 seconds, perform a soft reset.
See "Resetting your handheld"
handheld continues to freeze after a soft reset, you may have
an incompatible application installed. See
incompatible applications"
information.
Solution
Calibrate the screen. See
, Not all applications or screens have menus. Try changing to a
different application.
Try each of these in turn:
For your handheld to recognize handwriting input with the
stylus, you need to use Graffiti
Graffiti ® 2 writing"
Make the Graffiti 2 character strokes in the input area, not
on the display part of the screen. If you want to write on the
display part of the screen, you must turn on and activate
Writing Area Preferences. See
writing area:"
Write Graffiti 2 strokes for lowercase letters in the left side,
strokes for capital letters in the middle, and strokes for
numbers in the right side of the input area.
Make sure that Graffiti 2 is not in shift mode. See
these accent strokes, you can write the following accented
letters:" in Chapter
Run the Graffiti 2 tutorial application on your handheld for
tips on increasing your accuracy when you write Graffiti 2
characters.
Tapping and writing problems
in Chapter
in Appendix
later in this chapter for
"Digitizer Preferences"
® 2 writing. See
in Chapter 3.
"To use the full-screen
in Chapter 3.
3.
16.
A. If your
"Problems with
in Chapter 16
.
"Using
"Using
283