Chapter 1 Setting Up Your Palm™ Tungsten™ E Handheld
Minimum requirements: Mac computers
The minimum requirements for Mac computers are as follows:
Mac computer or compatible with a PowerPC processor
Mac OS 9.1 or later with 12MB available memory or Mac OS X, version 10.1.2 to
10.2.6 (Mac OS X requires administrator rights to install Palm Desktop software)
25MB available hard disk space
Monitor that supports screen resolution of 800 x 600 or better
CD-ROM or DVD-ROM drive for installing Palm Desktop software from the
included CD-ROM; or, you can download Palm Desktop software from
www.palm.com
Mouse
One available USB port
Upgrade information
If you already own a Palm OS
your old handheld and Palm Desktop software. Then follow the setup instructions
below.
Step 1: Charge your handheld
Connect the charging cable to a power source.
a.
Connect your handheld to the cable for at least three hours for an initial charge.
b.
After your handheld is charged, disconnect the handheld from the cable and
c.
follow the steps below.
NOTE
handheld to a cable that is connected to a power source whenever you are not
using it.
2
®
To keep the battery fully charged, we recommend connecting your
handheld, perform a HotSync
®
operation with