Palm Tungsten Tungsten E Handbook page 140

Chapter 13 Using Palm™ VersaMail™ Personal E-mail Software
You must also have the appropriate prerequisite for the type of connection you
want to make, as follows.
Connection type
High-speed wireless network
(GPRS)
GSM dial-up via external modem
accessory
GSM dial-up via infrared
connection to infrared phone
HotSync cable connected to
desktop
Using an ISP
If you are setting up a new e-mail account and have a well-known ISP such as
Earthlink or Yahoo, many of the required settings during the account setup are
automatically configured.
For other ISPs, you need the following information:
The protocol used for incoming mail, such as Post Office Protocol (POP) or
Internet Message Access Protocol (IMAP)
The name of the incoming mail server
The name of the outgoing mail (Simple Mail Transfer Protocol, or SMTP) server
Whether your e-mail account requires any security, such as Secure Sockets
Layer (SSL), APOP, or Extended Simple Mail Protocol (ESMTP)
130
Prerequisite
Wireless network card accessory (sold
separately).
Active high-speed wireless network account
ordered from your wireless carrier.
Wireless modem accessory that attaches
through the expansion card slot on your
handheld.
Active wireless service with a GSM carrier. If
you are using a high-speed wireless network,
the same carrier generally provides both
GSM and high-speed wireless service.
Note that some GSM carriers require you to
order a special data service (separate from
voice service) to make a network connection.
Infrared-enabled mobile phone.
Active wireless service with a GSM carrier. If
you are using a high-speed wireless network,
the same carrier generally provides both
GSM and high-speed wireless service.
Note that some GSM carriers require you to
order a special data service (separate from
voice service) to make a network connection.
HotSync cable (Windows users only).