Digitizer Preferences; Formats Preferences - Palm Tungsten Tungsten E Handbook

Chapter 16 Setting Preferences for Your Handheld
Tap the up or down arrows to change the hour.
3.
Tap each minute number, and then tap the arrows to change them.
4.
Tap OK, and then tap Done.
5.
To set the time zone and daylight saving time:
From the General Preferences list, select Date & Time.
1.
Tap the Location pick list.
2.
Select Edit List.
3.
Select the location where you want to set the time zone.
4.
Tap Edit to open the Edit Location dialog box.
5.
Follow the steps under
6.
zone and daylight saving time settings.
Tap Done.
7 .

Digitizer Preferences

The Digitizer Preferences screen opens the digitizer calibration screen. You can
recalibrate your screen after a hard reset or if your digitizer drifts. You may need
to repeat this process a few times until the calibration registers.
To calibrate your handheld screen:
From the General Preferences list, select Digitizer.
1.
Tap the targets as indicated on the screen as precisely as possible.
2.
TIP
a Preferences screen name, and then press Select on the navigator to open that
Preferences screen.

Formats Preferences

Use the Formats Preferences screen to set the country default and the display
format of the dates, times, and numbers on your handheld.
Country default
The country default sets date, time, week start day, and number conventions based
on geographic regions where you might use your handheld. For example, in the
United Kingdom, time often is expressed using a 24-hour clock. In the United
States, however, time is expressed using a 12-hour clock with an AM or PM suffix.
240
"Adding a location"
You can also press Left, Right, Up, and Down on the navigator to highlight
in Chapter 14 to select the time