Palm Tungsten Tungsten E Handbook page 270

Chapter 16 Setting Preferences for Your Handheld
Tap the Use calling card check box to select it.
3.
Select this
box to use a
calling card
Enter your calling card number on the Use calling card line.
4.
NOTE
long-distance services. However, because MCI works differently, MCI
customers need to enter the calling card number in the Phone # field and the
phone number in the Use calling card field.
TIP
number to compensate for the cue delay.
Tap OK.
5.
Tap Done.
6.
Connecting to your service
After you set your Connection and Network Preferences, establishing a connection
to your ISP or your company's network (dial-in server) is easy.
NOTE
web browser or news reader, to take advantage of this connection. For information
about third-party applications that support TCP/IP , check www.palm.com.
To establish a connection:
From the Communications Preferences list, select Network.
1.
Tap Connect to dial the current service and display the Service Connection
2.
Progress messages.
(Optional) From the Service Connection Progress dialog box, tap the box that
3.
displays the service name, select another service, and then tap Done.
To see expanded Service Connection Progress messages, press Down on the
navigator.
Tap Done.
4.
260
The Phone Setup dialog box works correctly for AT&T and Sprint
It's a good idea to add at least three commas before your calling card
If you are connecting to an ISP , you need a third-party application, such as a
Enter your
calling card
number here