Palm Tungsten Tungsten E Handbook page 271

To close a connection:
From the Communications Preferences list, select Network.
1.
Tap Disconnect to terminate the connection between your handheld and your
2.
service.
Tap Done.
3.
Adding detailed information to a network service profile
If you are using one of the predefined network service profiles, you probably need
to enter only your username, password, and telephone number. If you are creating
a new network service profile, you may need to provide additional information to
your ISP or dial-in server. You use the Details dialog box to add more information
to a selected network service profile.
To add connection details:
From the Communications Preferences list, select Network.
1.
Tap Details.
2.
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP
application.
To set the Idle timeout:
Tap the Idle timeout pick list, and then select one of the following options:
1.
Waits one minute for you to open another application before it
1 minute
drops the connection.
Waits two minutes.
2 minutes
Waits three minutes.
3 minutes
Keeps your PPP or Serial Line Internet Protocol (SLIP)
Never
connection until you turn off your handheld (or until it times
out).
Tap OK.
2.
Setting Communication Preferences
261