Set Up Your Handheld - Palm Tungsten W Read This First Manual

START HERE
2

Set up your handheld

a. Remove the handheld from the cradle.
1. Tilt it forward.
b. Press the power button.*
c. Remove the stylus.
d. Follow Setup instructions on
the screen.
2. Lift up.
e. Tap firmly the centre of at least
3 targets.
Stylus
Note!
Your handheld turns off automatically
after one minute of inactivity. Press the
power button to turn it on again.
Power
button
* Problems? See Troubleshooting on the other side
of this document.
Centre
Use stylus to tap
centre of target