Performing An Infrared Hotsync Operation - Palm Tungsten Tungsten E Handbook

Chapter 15 Performing HotSync
Select the On check box next to IR port.
4.
Close the HotSync Software Setup window.
5.

Performing an infrared HotSync operation

After you complete the steps to prepare for performing an infrared HotSync
operation, it's easy to perform the actual operation.
To perform an infrared HotSync operation on your handheld:
Tap the Home icon
1.
Select the HotSync icon
2.
Tap Local.
3.
Tap the pick list below the HotSync icon, and then select IR to a PC/Handheld.
4.
Position the IR port of your handheld within a couple of inches of the IR port of
5.
your computer.
Tap the HotSync icon to start the infrared HotSync operation.
6.
228
® Operations
.
.
Tap here to start
IR HotSync
operation
Shown with
Mac OS X