Palm Tungsten Tungsten E Handbook page 300

Appendix B Frequently Asked Questions
E-mail is not being sent
[continued].
290
Configure ESMTP. Many services require authenticated
access to use their SMTP servers, or ESMTP.
– In the VersaMail application, press Function + Menu,
and then select Mail Servers on the Options menu.
– Tap Details.
– Tap the Options pick-list, and then select
Advanced Outgoing.
– Select the My server requires authentication box.
– Enter your username and password.
– Tap OK, and then tap OK again.
Select another available server for sending mail. Many ISPs,
such as cable companies, require that you have an Internet
connection to their network to send e-mail through their
servers. In this case, you can almost always receive e-mail
from these accounts, but if you want to send e-mail, you
must send it through another server.
– Press Function + Menu on the keyboard, and then select
Account Setup from the Accounts menu.
– Tap the problem account.
– Tap Edit.
– Tap Next.
– Make sure your username and password are correct,
and then tap Next.
– In the Outgoing Mail Server field, enter the address of a
server through which you can send mail.
– Tap Next.
– Tap Done.