Alcatel-Lucent 1665 Installation Manual page 56

Physical installation and powering
I
............................................................................................................................................................................................................................................................
Section and Chapter
Part II: "Stand-alone installation tests"
Chapter 5, "Software download
and circuit pack installation"
Chapter 6, "Installation tests"
............................................................................................................................................................................................................................................................
I- 1 0
Procedure
LNW31 (OC-48 OLIU) or LNW402 (OC-48
PTB-based DWDM) low-speed installation
(optional) (p. 4-22)
LNW66 (10/100T) installation (optional) (p.
4-23)
LNW63 (1000BASE-SX/LX/LX10), LNW64
(8 GbE), LNW74 (10/100 T/F), LNW87
(FE/GBE PL) and LNW170 (100/1G FXS)
installation (optional) (p. 4-24)
LNW73 (FC-1X/2X) and LNW73C (FC-
1X/2X with compression) installation
(optional) (p. 4-25)
177D/LNW98 blank CP installation (optional)
(p. 4-27)
177E/LNW97 blank CP installation (optional)
(p. 4-27)
Software installation (p. 5-2)
Circuit pack installation (p. 5-2)
®
Use of WaveStar CIT software (p. 5-6)
Circuit pack firmware version verification (p.
5-11)
Alcatel-Lucent 1665 DMX shelf initialization
(p. 5-13)
Provision/enable/disable TCP/IP on an IAO
LAN port (p. 5-13)
Reset system date and time (p. 5-16)
Provision/enable/disable the Alcatel-Lucent
1665 DMX as a TL1 TCP/IP GNE (p. 5-17)
LBO software settings (p. 6-2)
Setting DS1 LBOs (p. 6-2)
Setting DS3/EC1 and TMUX LBOs (p. 6-3)
Overview
Completed
Required Yes No
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
See Note 1
Yes
Yes
Yes
See Note 1
Yes
See Note 1
See Note 1
See Note 1
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010