............................................................................................................................................................................................................................................................

Install pluggable transmission modules

Steps

Complete the following steps to install pluggable transmission modules in a circuit pack

that has already been installed in a shelf.

Determine the circuit pack and socket being equipped with the pluggable transmission

module.

Hold the connector/latch-end of the module in your left hand with the gold fingers facing

you. The module should be positioned in manner similar to

transmission module with dust plug (optical PTMs only)" (p.

Figure E-1 Pluggable transmission module with dust plug (optical PTMs only)

Note:

need to clean the module.

Dust plugs (Optical PTMs only)

Any of the following examples could be similar to the dust plug in your pluggable

transmission module.

Figure E-2 Examples of dust plugs

Referring to

mechanism on the pluggable transmission module you have.

Alcatel-Lucent 1665 DMX R9.0

365-372-304R9.0 Issue 2

July 2010

Do not remove the dust plug unless you are ready to connect fibers or if you

Figure E-3, "Module types" (p. E-4)

Install pluggable transmission modules

MA-DMX-422

There are a variety of different types of dust plugs.

MA-DMX-421

below, determine the type of latching

Figure E-1, "Pluggable

E-3).

E - 3

Table of Contents

Install Pluggable Transmission Modules; Pluggable Transmission Module With Dust Plug (Optical Ptms Only; Examples Of Dust Plugs - Alcatel-Lucent 1665 Installation Manual

Install pluggable transmission modules

Related Manuals for Alcatel-Lucent 1665

Related Content for Alcatel-Lucent 1665

Table of Contents