Cable And Fiber Installation - Alcatel-Lucent 1665 Installation Manual

About this document
............................................................................................................................................................................................................................................................
Chapter 3, "Cable and fiber installation"
This chapter provides the information and procedures for installing and cabling the
Alcatel-Lucent 1665 DMX system. It provides the additional cabling information needed
for the added DS1, DS3 capacity and Ethernet capacity.
Chapter 4, "Powering and initial circuit pack installation"
This chapter provides information for verifying that the shelf is being supplied with the
proper power and provides instructions for circuit pack installation.
Part II: "Stand-alone installation tests"
Chapter 5, "Software download and circuit pack installation"
Software download and circuit pack installation is covered in this chapter.
Chapter 6, "Installation tests"
This chapter verifies proper transmission cabling installation and functionality.
Chapter 7, "Operational tests"
This chapter provides instructions to test protection switching and the non-transmission
cabling. This section is not intended to replace acceptance test procedures.
Part III: "Network turn-up and testing"
Chapter 8, "OC-3/12/48 ring setup and testing: integration procedures"
This chapter provides the tests to verify proper ring fiber cabling and protection switching.
Chapter 9, "WDMX setup and testing: integration procedures"
This chapter is used to verify WDMX connectivity between Alcatel-Lucent 1665 DMX
nodes. The chapter includes the LNW785 8 channel Optical Multiplexer Demultiplexer
(OMD) and the LNW705 XM10G/8 Muxponder circuit packs. It is not intended to replace
acceptance test procedures.
Part IV: "Supplementary information and installation checklist"
Appendix A, "Fiber cleaning"
This appendix describes the Lucent recommended method for the cleaning and inspection
of optical connectors using specific tools and materials that have been proven to be
effective in the assembly and testing of optical equipment.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
x i x