Pluggable transmission module installation
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
4
Referring to
........................................................................................................................................................................................................................
5
Before inserting the module, the latch must be in the closed position. With the dust plug in
place, the latch is in the closed position.
Figure E-4
the appearance of the port opening and latch mechanism may vary.
Figure E-4 Latch type 3 (opened and closed)
........................................................................................................................................................................................................................
6
Proceed to
........................................................................................................................................................................................................................
7
Before inserting the module, the latch must be in the closed position. With the dust plug in
place, the latch is in the closed position.
Figure E-5
the appearance of the port opening and latch mechanism may vary.
............................................................................................................................................................................................................................................................
E - 6
Step
3, what type of latching mechanism does your module have?.
If...
Type 1 or 2 (optical)
Type 3 (optical)
Type 4, 5, or 6 (optical)
Type 7 or 8 (electrical)
shows the open and closed position of the latch. Depending on your PTM type,
Swivel Latch
Open Position
(to the left)
Step
8.
shows the open and closed position of the latch. Depending on your PTM type,
Then...
Proceed to
Step 8
Continue with
Step 5
Proceed to
Step 7
Proceed to
Step 7
Swivel Latch
Closed Position
(to the right)
Install pluggable transmission modules
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
MA-DMX-423
July 2010