Alcatel-Lucent 1665 Installation Manual page 353

D Fiber labeling
Overview
Purpose
This chapter describes the labeling of the fiber.
Contents
This chapter contains the following.
Fiber description
Fiber labels
Fiber description
Fibers
There are three different types of single-mode fiber used with the Alcatel-Lucent 1665
Data Multiplexer (Alcatel-Lucent 1665 DMX) system, simplex blue fiber, simplex yellow
fiber, and the customer's fiber, and two types of multi-mode fiber used with the Alcatel-
Lucent 1665 DMX, multi-mode simplex gray fiber and the customer's multi-mode fiber.
Gray fiber
Gray fiber is made up of a multi-mode gray colored fiber equipped with LC connectors at
both ends. The Gray Fibers come in different lengths as well as custom lengths. The length
is given on the protection boot of the LC connector.
These fibers are used to make connections from the circuit pack to the LGX. Installation is
covered in 2, 4, 5, and 8.
............................................................................................................................................................................................................................................................
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010
D-1
D-3
D- 1