............................................................................................................................................................................................................................................................

Cut the office alarm cable to the desired length.

Wire-wrap the loose end of the office alarm cable to the alarm panel, making connections

as listed in

N D

........................................................................................................................................................

Alarm mult

The following steps should be performed when the bottom shelf in the bay will be directly

connected to the office alarms. The cable added in this procedure is to mult office alarms

in a bay to the bottom shelf. In this procedure the bottom shelf is multed to the shelf

immediately above. That shelf is then multed to the shelf above it. Continue until the top

shelf is connected.

Note:

reported, all office alarm cable mults from that shelf to the bottom shelf must be in

place. No shelf should be skipped.

Obtain the office alarm mult cable (848589602 for Alcatel-Lucent 1665 DMX to Alcatel-

Lucent 1665 DMX and 848861530 for Alcatel-Lucent 1665 DMX to 1675 LambdaUnite).

Connect one end to ALM MULT (J13) of the Alcatel-Lucent 1665 DMX high-capacity

shelf.

Route the office alarm mult cable to the side of the bay and connect it to ALM (J12) of the

Alcatel-Lucent 1665 DMX high-capacity shelf above or to Alcatel-Lucent 1675

LambdaUnite as required.

3 - 5 4

Table 3-23, Office alarm

T E P S

In order for office alarms in a shelf (other than the bottom shelf) to be

connections.

Office alarm cable installation

Alcatel-Lucent 1665 DMX R9.0

365-372-304R9.0 Issue 2

July 2010

Table of Contents

Alcatel-Lucent 1665 Installation Manual page 144

Related Manuals for Alcatel-Lucent 1665

Related Products for Alcatel-Lucent 1665

Table of Contents