Power Cable Positioning - Alcatel-Lucent 1665 Installation Manual

Physical installation
............................................................................................................................................................................................................................................................
Table 2-2 Power cable positioning
........................................................................................................................................................................................................................
3
There are two mounting positions on each side of the Alcatel-Lucent 1665 DMX high-
capacity shelf chassis as shown in
(p. 2-13). It is recommended that if multiple shelves are being installed in a frame, the
power connector positions be alternated as shown in
routing" (p.
Determine if the power connector needs to be moved to the other mounting position. If so,
move the power connector to the other mounting position now.
............................................................................................................................................................................................................................................................
2 - 1 2
2-14).
Important!
Use provided hardware only to adjust the position of the power
connector housing.
Power cable and cable bracket installation
Figure 2-6, "Power connector mounting positions"
Figure 2-7, "Alternating power cable
Alcatel-Lucent 1665 DMX R9.0
365-372-304R9.0 Issue 2
July 2010