Installing And Removing The Flash Memory Cards; Description; Reference - Nortel CVX 600 Hardware Installation Manual

Installing and Removing the Flash Memory Cards

Description

The SCC-SM contains dual PCMCIA slots for the flash memory card. The flash
memory card provides storage for the CVX 600 nonvolatile file system (NVFS),
operating system software, and configuration files. When you insert the flash
memory card, the NVFS automatically provides access to the flash memory card.
The dual PCMCIA slots are labeled 1 and 2. Slot 1 is the C: drive and slot 2 is the
D: drive. Always use slot 1 for the flash memory card. Use slot 2 if you need to
copy the flash memory card in slot 1 to a flash memory card in slot 2.

Reference

See the manual CVX Multi-Service Access Switch Configuration Guide for
information about copying a flash memory card.
296-1011-202 Rel. 5.0, Doc. Rev. 02.01

Installing and Removing the Flash Memory Cards

Note: If the flash memory card is not already in the SCC, insert it into
slot 1.
Warning: You must use software Release 5.0 or later when using an
Optical SCC-II-SM. Use of older versions will corrupt the SCC-SM,
requiring the return of the module to Nortel for reprogramming. Do not
copy earlier versions of software to a flash memory card used in an
Optical SCC-II-SM.
Chassis Connections
2-29