Using the BayStack 650 Wireless LAN Access Point
Authentication Commands
The authentication commands enable you to configure and to display the WEP
authentication scheme.
The authentication commands are:
•
auth open-system—turns on/off Open System Authentication
•
auth shared-key—turns on/off Shared-Key Authentication
•
aul show—displays authentication attributes
The syntax for the authentication commands is:
auth open-system {on | off}
auth shared-key {on | off}
auth show
Figure 6-5
Figure 6-5.
6-10
shows an example of the authentication commands.
Authentication Commands Example
203282-B