Using the BayStack 650 Wireless LAN Access Point
The syntax for the PHY commands is:
phy add-bss-basic-rate <num_Mbps>
phy channel <channel_no>
phy delete-bss-basic-rate <num_Mbps>
phy dwell-time <num_kus>
phy hop-sequence <pattern_no>
phy show
where:
num_Mbps is number of mega-bits per second.
channel_no is channel number.
num_kus is number of k micro-second ( s).
pattern_no is hop sequence pattern number.
6-18
203282-B