Enabling Auto-Negotiate Hop Sequence (Fh) - Nortel BayStack 650 User Manual

Click Next.
6.
A confirmation dialog box opens.
Click Finish if the information is correct.
7.
The Configuration Completion dialog box opens
the changes are being processed.
Click OK when the process is complete.
8.

Enabling Auto-Negotiate Hop Sequence (FH)

With frequency hopping, a radio transmits and receives on one frequency for a
short period of time and then pseudo-randomly moves to another frequency every
dwell time. Go to
setting the dwell time (in TUs). This technology reduces susceptibility to
interference from other transmitters and noise sources in the same 2.4 GHz range
since transmission is constantly shifting from one frequency to the next.
Check the Auto-negotiation parameter or set the Pattern to select the desired
hop sequence.
To enable the auto-negotiate hop sequence (FH):
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click Auto-negotiate hop sequence (FH).
3.
Click Next.
4.
The Auto-negotiate hop sequence (FH) dialog box opens.
Check the check-box to enable (default), or deselect to disable hop
5.
sequence.
Click Next.
6.
A confirmation dialog box opens.
Click Finish if the information is correct.
7.
The Configuration Completion dialog box opens
the changes are being processed.
Click OK when the process is complete.
8.
203282-B
"Setting the Dwell Time
Installing and Starting the AP Manager
(Figure 4-16) showing that
(FH)" on page 4-34 for instruction on
(Figure 4-15) opens.
(Figure 4-16) showing that
4-35