Adapter Commands; Figure 6-3. Adapter Commands Example - Nortel BayStack 650 User Manual

Using the BayStack 650 Wireless LAN Access Point

Adapter Commands

The Adapter commands are:
• adpt load-image—upgrades the firmware for the adapter
• adpt show—displays attributes for the adapter
The syntax the ACL commands is:
adpt load-image <file_name> <ip_addr>
adpt show
where:
file_name is the adapter firmware file name.
ip_addr is the IP address of TFTP server.
Figure 6-3
Figure 6-3.
6-8
shows an example of the adapter commands.
Adapter Commands Example
203282-B