Using the BayStack 650 Wireless LAN Access Point
There are three possible status symbols in the first column of the access point
dialog box.
Table 4-2.
Symbol
-
*
!
Click your access point (select only one device).
2.
Click Configure.
3.
The AP Manager logs in to the access point and then opens the Configuration
dialog box, with the Basic tab option selected
Note: The Configuration dialog box may also open if you:
•
Choose Configure > Quick List > (group name). Group has one access point.
•
Choose Configure > Group > (group name). Group has one access point.
4-8
Table 4-2
describes these status symbols.
Access Point Dialog Box Status Symbols
Description
Access point is not recognized by the AP Manager application.
Access point has been verified by the AP Manager application.
AP Manager attempted to verify the access point, but the attempt failed.
(Figure
4-5).
203282-B