Nortel BayStack 650 User Manual page 60

Using the BayStack 650 Wireless LAN Access Point
Table 4-3
Table 4-3.
Item
Name
ESSID
IP Address
Subnet
Gateway
Change Password
Enable Telnet Access
Wireless MAC Address Displays the MAC address of a specific access point.
Firmware
NTI MIB
Note: Ethernet MAC address is the MAC address for the access point. The wireless
MAC address is the MAC address of the adapter installed in your access point.
4-10
describes the items in the Basic tab.
Basic Tab Items
Description
Type a new name for the access point. From 1 to
32 alphanumeric characters.
Type a new service set identification for the access point.
From 1 to 32 alphanumeric characters.
Type the IP address of the access point.
Type or add the Subnet mask for the access point.
Type or add the Gateway address for the access point
(optional).
Check to change or add the password of the access point.
Check to enable Telnet for the access point (default:
unchecked).
Displays the firmware version of a specific access point.
Displays the NTI MIBs of a specific access point.
203282-B