Changing A Bootp Entry - Nortel BayStack 650 User Manual

Add a MAC and IP Address. The Gateway address is optional.
3.
Click OK.
4.
The BOOTP
entry highlighted.

Changing a BOOTP Entry

To change a BOOTP entry:
Choose Tools > BOOTP Table.
1.
The BOOTP dialog box
Click Change.
2.
The Change BOOTP Entry dialog box
Figure 5-11.
Type the appropriate values.
3.
Click OK.
4.
203282-B
(Figure 5-9) dialog box is displayed, with the added BOOTP
(Figure 5-9) opens.
Change BOOTP Entry Dialog Box
Managing the Access Point
(Figure 5-11) opens.
5-13