Connecting Power
The access point does not have an off/on switch, so power is applied by inserting
the power adapter into a standard wall outlet and into the device.
Warning: Removing the power cord is the only way to turn off power to this
device. Place the power cord in a location that can be accessed quickly in case of
an emergency.
Figure 3-3.
The access point is now ready to provide network access to a mobile unit (a laptop
with a BayStack 650 PC Card installed). The BayStack 650 Access Point and the
BayStack 650 PC Card are configured with the same default: SSID. As long as
this default does not change on the access points, you can start up and log on to
the network without any additional configuration.
203282-B
Installing the AC Power Adapter
Installing the Access Point
8710FB
3-5