Nortel BayStack 650 User Manual page 106

Using the BayStack 650 Wireless LAN Access Point
Table 5-4
Table 5-4.
Items
Add
Change
Removes
Restrictions
Assign Dynamic IP
Addresses
Click Add.
2.
The Add BOOTP Entry dialog box
fields are blank, except the Subnet Mask.
Figure 5-10.
5-12
describes the items in the BOOTP dialog box.
BOOTP Dialog Box Items
Description
Adds a BOOTP entry.
Changes a currently listed
"Changing a BOOTP
changing a BOOTP entry.
Removes a currently listed entry. Go to
Entry" on
entry.
Sets restriction for the currently listed entry. Go to
BOOTP
the restrictions of a BOOTP entry.
Assigns an IP address dynamically for the currently listed entry.
Go to "Assigning a Dynamic IP
instructions on assigning a IP address dynamically.
Add BOOTP Entry Dialog Box
(Figure
Entry" on page 5-13
page 5-14 for instructions on removing a BOOTP
Restrictions" on page 5-14
Address" on
(Figure 5-10) opens. By default, all entry
5-9) BOOTP entry. Go to
for instructions on
"Removing a BOOTP
"Setting
for instructions on setting
page 5-16 for
203282-B