Table 75 Bandwidth management commands
Command
monitor
lan
wan
moveFilter
<
channName>
config
save
load
clear
Certificates commands
Table 76
preceded by
my_cert list
All of these commands start with
Table 76 Certificates commands
Command
my_cert
create
<#>
<#>
<from>
<to>
describes the certificate commands. Each of these commands must be
certificates
to display all of your certificate names and basic information.
Nortel Business Secure Router 222 Configuration — Advanced
Appendix H Command Interpreter 301
(or
for short). For example, type
cert
.
certificates
Description
Description
Displays the bandwidth usage
of the specified LAN class (or
all of the LAN classes if you do
not specify one). The first time
you use the command turns it
on; the second time turns it off,
and so on.
Displays the bandwidth usage
of the specified WAN class (or
all of the WAN classes if you
do not specify one). The first
time you use the command
turns it on; the second time
turns it off, and so on.
Changes the filter order.
<channName>: LAN, WAN
<from>: filter index number
<to>: filter index number
Saves the BWM configuration.
Loads the BWM configuration.
Clears the BWM configuration.
cert