Command Syntax; Figure 109 Command Mode In Menu 24 - Nortel 222 User Manual

200 Chapter 16 System Maintenance menus 8 to 10

Figure 109 Command mode in Menu 24

Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Firmware Update
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:

Command syntax

The command keywords are in Courier New font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The | symbol means "or".
For example,
sys filter netbios config <type> <on|off>
NN47922-501