Configuring Dynamic Dns - Nortel 222 User Manual

50 Chapter 2 SMT menu 1 - general setup
Table 4 General setup menu fields
Field
Edit dynamic
DNS

Configuring dynamic DNS

To configure Dynamic DNS, go to Menu 1: General Setup and press
[SPACE BAR] to select Yes in the Edit Dynamic DNS field. Press [ENTER] to
display Menu 1.1— Configure Dynamic DNS
every field shown.
NN47922-501
Description
You must also configure a VPN branch office rule
since the Business Secure Router uses a VPN tunnel
when it relays DNS queries to the private DNS server.
One of the rule's IP policies must include the LAN IP
address of the Business Secure Router as a local IP
address and the IP address of the DNS server as a
remote IP address.
A Private DNS entry with the IP address set to 0.0.0.0
changes to None after you click Apply. A duplicate
Private DNS entry changes to None after you save
your changes.
Press [SPACE BAR] and then [ENTER] to select Yes
or No (default). Select Yes to configure Menu 1.1:
Configure Dynamic DNS, discussed next.
After you complete this menu, press [ENTER] at the
prompt "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.
Example
No
(default)
(Figure 8). Not all models have