Figure 46 15.2.1: Nat Server Configuration; Table 31 15.2.1: Nat Server Configuration - Nortel 222 User Manual

Figure 46 15.2.1: NAT Server Configuration

15.2.1 - NAT Server Configuration
-----------------------------------------------------------------
Name=
Active= No
Start port= 0
IP Address= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.

Table 31 15.2.1: NAT Server Configuration

Field
Index
Name
Active
Start Port
End Port
IP Address
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to
Confirm..." to save your configuration, or press [ESC] at any time to cancel.
4
Enter a port number in the Start Port field. To forward only one port, enter it
again in the End Port field. To specify a range of ports, enter the last port to
be forwarded in the End Port field.
Chapter 9 Network Address Translation (NAT) 119
Index= 1
End port= 0
Description
This is the index number of an individual port forwarding server entry.
Enter a name to identify this port-forwarding rule.
Press [SPACE BAR] and then [ENTER] to select Yes to enable the NAT
server entry.
Enter a port number in the Start Port field. To forward only one port,
enter it again in the End Port field. To specify a range of ports, enter the
last port to be forwarded in the End Port field.
Enter the inside IP address of the server.
Nortel Business Secure Router 222 Configuration — Advanced