Setting Up Your Computer Ip Address; Windows 95/98/Me - Nortel 222 User Manual

Appendix A

Setting up your computer IP address

All computers must have a 10M or 100M Ethernet adapter card and TCP/IP
installed.
Windows 95/98/Me/NT/2000/XP, and Macintosh OS 7 and later operating
systems and all versions of UNIX/LINUX include the software components you
need to install and use TCP/IP on your computer. Windows 3.1 requires the
purchase of a third-party TCP/IP application package.
TCP/IP is already installed on computers using Windows NT/2000/XP, or
Macintosh OS 7 and later operating systems.
After the appropriate TCP/IP components are installed, configure the TCP/IP
settings in order to communicate with your network.
If you manually assign IP information instead of using dynamic assignment, make
sure that your computers have IP addresses that place them in the same subnet as
the Business Secure Router LAN port.

Windows 95/98/Me

Click Start, Settings, Control Panel and double-click the Network icon to open
the Network window
Nortel Business Secure Router 222 Configuration — Advanced
217