Remote Node Profile (Backup Isp) - Nortel 222 User Manual

Table 8 Advanced WAN port setup: AT commands fields
Field
Speed
Call Control
Dial Timeout (sec)
Retry Count
Retry Interval (sec)
Drop Timeout (sec)
Call Back Delay (sec) Enter a number of seconds for the Business Secure

Remote node profile (Backup ISP)

Enter 2 in Menu 11 Remote Node Setup to open Menu 11.2 Remote Node
Profile (Backup ISP)
port connection. This feature is not available on all models.
Chapter 3 WAN and Dial Backup Setup 59
Description
Enter the keyword preceding the connection speed.
Enter a number of seconds for the Business Secure
Router to keep trying to set up an outgoing call
before timing out (stopping). The Business Secure
Router times out and stops if it cannot set up an
outgoing call within the timeout value.
Enter a number of times for the Business Secure
Router to retry a busy or no-answer phone number
before blacklisting the number.
Enter a number of seconds for the Business Secure
Router to wait before trying another call after a call
has failed. This applies before a phone number is
blacklisted.
Enter a number of seconds for the Business Secure
Router to wait before dropping the DTR signal if it
does not receive a positive disconnect confirmation.
Router to wait between dropping a callback request
call and dialing the corresponding callback call.
(Figure 12) and configure the setup for your Dial Backup
Nortel Business Secure Router 222 Configuration — Advanced
Default
CONNECT
60
seconds
0 to
disable
the
blacklist
control
20
seconds
15
seconds