Bandwidth Management Commands; Table 75 Bandwidth Management Commands - Nortel 222 User Manual

298 Appendix H Command Interpreter

Bandwidth management commands

Table 75
commands must be preceded by
the LAN port's bandwidth management settings.

Table 75 Bandwidth management commands

Command
interface lan
wan
class lan
NN47922-501
lists and describes the bandwidth management commands. Each of these
enable <bandwidth
xxx>
<wrr|prr>
<efficient>
disable
enable <bandwidth
xxx>
<wrr|prr>
<efficient>
disable
add # bandwidth xxx
. For example, type
bm
<name xxx>
<priority
x>
to display
bm show lan
Description
Enables bandwidth
management (BWM) for traffic
going out the LAN interface.
You can also specify the b/s of
bandwidth.
Sets the queueing mechanism
to fairness-based (WRR) or
priority-based (PRR).
Turns on the work-conserving
feature.
Disables bandwidth
management for traffic going
out the LAN interface.
Enables bandwidth
management for traffic going
out the WAN interface. You
can also specify the b/s of
bandwidth.
Sets the queueing mechanism
to fairness-based (WRR) or
priority-based (PRR).
Turns on the work-conserving
feature.
Disables bandwidth
management for traffic going
out the WAN interface.
Adds a class with bandwidth
xxx b/s in LAN. The name is
for your information.
Sets the class priority. The
range is between 0 (the
lowest) to 7 (the highest).