Firmware File Upload; Figure 102 Telnet Into Menu 24.7.1 Upload System Firmware - Nortel 222 User Manual
Business secure router
Hide thumbs
Also See for 222:
- Release note (10 pages) ,
- Quick install manual (1 page) ,
- Overview (72 pages)
Table of Contents
Advertisement
190 Chapter 15 Firmware and configuration file maintenance
Firmware file upload
FTP is the preferred method for uploading the firmware and configuration. To use
this feature, your computer must have an FTP client.
When you use Telnet to access the Business Secure Router, the screens for
uploading firmware and the configuration file using FTP appear.
Figure 102 Telnet Into Menu 24.7.1 Upload System Firmware
To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "nnadmin" and
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
NN47922-501
Menu 24.7.1 - System Maintenance - Upload System Firmware
SMT password as requested.
of your firmware upgrade file on your workstation and "ras" is the
remote file name on the system.
Press ENTER to Exit:
Advertisement
Table of Contents
