Nortel 222 User Manual page 286

286 Appendix H Command Interpreter
Table 72 IP commands
Command
load
save
config
dropIcmp
igmp
debug
forwardall
querier
iface
NN47922-501
<rule #>
name <site name>
destination <dest
addr>[/<bits>]
<gateway>
[<metric>]
mask <IP subnet
mask>
gateway <IP
address>
metric <metric #>
private <yes|no>
active <yes|no>
[0|1]
[level]
[on|off]
[on|off]
<iface> grouptm
<timeout>
<iface> interval
<interval>
<iface> join
<group>
<iface> leave
<group>
<iface> query
Description
Loads the specified static route rule into the
buffer.
Saves a rule from the buffer to the System
Parameters Table.
Sets the name for a static route.
Sets a static route's destination IP address
and gateway.
Sets a static route's subnet mask.
Sets a static route's gateway IP address.
Sets a static route's metric number.
Turns private mode on or off.
Enables or disables a static route rule.
Sets whether or not the device allows ICMP
fragment packets.
Sets IGMP debug level.
Activates or deactivates IGMP forwarding to
all interfaces flag.
Turns on or off IGMP stop query flag.
Sets IGMP group timeout for the specified
interface.
Sets IGMP query interval for the specified
interface.
Adds an interface to a group.
Removes an interface from a group.
Sends an IGMP query on the specified
interface.