Uploading Firmware And Configuration Files; Figure 100 System Maintenance: Starting Xmodem Download Screen; Figure 101 Successful Restoration Confirmation Screen - Nortel 222 User Manual

Figure 100 System Maintenance: Starting Xmodem Download Screen

Run the HyperTerminal program by clicking Transfer, then Send File.
Starting XMODEM download (CRC mode) ...
CCCCCCCCC
After a successful restoration, the screen shown in
key to restart the Business Secure Router and return to the SMT menu.

Figure 101 Successful Restoration Confirmation Screen

Save to ROM
Hit any key to start system reboot.

Uploading Firmware and Configuration Files

This section shows you how to upload firmware and configuration files. You can
upload configuration files by following the procedure
page
Maintenance – Upload System Configuration File.
Chapter 15 Firmware and configuration file maintenance 189
186, or by following the instructions in Menu 24.7.2 – System
Warning: Do not interrupt the file transfer process as this can
permanently damage your
Nortel Business Secure Router 222 Configuration — Advanced
Figure 101
Business Secure Router.
Type the configuration
file's location, or click
Browse to search for it.
Choose the Xmodem
protocol.
Click Send.
appears. Press any
"Restore configuration" on