Nortel 222 User Manual page 276

276 Appendix H Command Interpreter
Table 69 Sys commands
Command
nat
nailup
mtu
accessblock
save
stdio
tos
display
debug
listPerHost
sessPerHost
timeout
NN47922-501
<none|sua|full_feature>
<no|yes>
<value>
[entry no.]
[minute]
display
icmp
igmp
tcpsyn
tcp
tcpfin
udp
gre
esp
ah
Description
Configures remote node NAT.
Configures a remote node connection
to be nailed up (always on).
Sets the remote node Maximum
Transmission Unit.
Blocks access to a remote node.
Saves remote node information.
Sets or displays the management
terminal idle timeout value.
Shows all runtime Temporarily Open
Sessions.
Turns TOS debug message on or off.
Displays all hosts session counts.
Sets the session per host limit.
Displays all TOS (Temporarily Open
Session) timeout information.
Sets the ICMP session idle timeout
value.
Sets the IGMP session idle timeout
value.
Sets the SYN TCP session idle timeout
value.
Sets the TCP session idle timeout
value.
Sets the TCP FIN session idle timeout
value.
Sets the UDP-session idle-timeout
value.
Sets the GRE-session idle-timeout
value.
Sets the ESP-session idle-timeout
value.
Sets the AH-session idle-timeout value.