Nortel 222 User Manual page 273

Table 69 Sys commands
Command
remove
reset
feature
firmware
firewall
hostname
logs
category
<set 1-3>
[hostname]
8021x
access [0:none/1:log/
2:alert/3:both]
attack [0:none/1:log/
2:alert/3:both]
cdr [0:none/1:log]
display
error [0:none/1:log/
2:alert/3:both]
icmp [0:none/1:log]
ike [0:none/1:log/2:alert/
3:both]
ipsec [0:none/1:log/
2:alert/3:both]
javablocked [0:none/1:log]
mten [0:none/1:log]
packetfilter [0:none/
1:log]
ppp [0:none/1:log]
remote [0:none/1:log]
tcpreset [0:none/1:log]
upnp [0:none/1:log]
Nortel Business Secure Router 222 Configuration — Advanced
Appendix H Command Interpreter 273
Description
Removes extra phone numbers.
Resets node and mask.
Displays a list of the device's major
features.
Displays the ISDN firmware type.
See "Sys firewall commands" on
page 297 for information about the
system firewall commands.
Sets or displays the system name.
Records logs for IEEE 802.1X.
Records, sends alerts, or both for
access control logs.
Records, sends alerts, or both for
firewall attack logs.
Records Call Detail Record logs.
Displays the category settings.
Records, sends alerts, or both for
system error logs.
Records ICMP logs.
Records, sends alerts or both for
access control logs.
Records the access control logs
Records the java blocked logs.
Records the system maintenance logs.
Records the packet filter logs.
Records the PPP logs.
Records the remote management logs.
Records the TCP reset logs.
Records the UPnP logs.