Nortel 222 User Manual page 275

Table 69 Sys commands
Command
save
syslog
consolidate
updateSvrIP
switch
reboot
rn
load
disp
subject [mail subject]
auth
user
passwd
active [0:no/1:yes]
display
facility [Local ID(1-7)]
server [domainName/IP]
switch <0:on|1:off>
period
msglist
<minute>
bmlog <0:no|1:yes>
display
trilog <0:no|1:yes>
[0:cold boot/1: immediate
reboot/2: bootModule debug
mode]
<entry no.>
<entry no.>(0:working
buffer)
Nortel Business Secure Router 222 Configuration — Advanced
Appendix H Command Interpreter 275
Description
Sets the log e-mail's subject.
Enables or disables SMTP
authentication.
Sets the SMTP authentication
username.
Sets the SMTP authentication
password.
Saves the log settings from the buffer.
Enables or disables syslog logging.
Displays the syslog settings.
Specifies the file to which the device
logs the syslog messages.
Specifies the IP address of the syslog
server the syslogs are sent.
Turns log consolidation on or off.
Sets the consolidation period (in
seconds).
Displays the consolidated messages.
Sets how often to resolve the mail and
syslog server domain name to an IP
address.
Turns the broadcast or multicast log on
or off.
Displays switch settings.
Turns triangle route logging on or off.
Restarts the device.
Loads remote node information.
Displays remote node information.