Configuring The Management Ip Address - Nortel VPN Router 1750 Installation Manual

Configuring the management IP address

Use the serial interface to assign the VPN Router 1750 a management IP address
and subnet mask so that you can then use a Web browser for management.
To configure the management IP address using the serial interface, perform the
following steps:
1 Turn on the terminal or PC.
2
Configure the terminal or PC with the following specifications:
•
•
•
•
•
3 Connect the serial cable (supplied with the VPN Router 1750) from the serial
port on the gateway to a terminal or to the communications port on a PC.
4
On the PC, start HyperTerminal or another terminal emulation program, and
press Enter.
The Nortel VPN Router window appears with the following message:
Nortel VPN Router
Copyright (c) 1999-2005 Nortel Networks, Inc.
Version:
Creation date:
Unit Serial Number:
Please enter the administrator's user name:
5 Enter the default user name and password for the administrator.
The factory default user name is admin, and the default password is setup. The
user name and password are case sensitive; see the following example.
Please enter the administrator's user name: admin
Please enter the administrator's password: *****
Chapter 4 Management IP interface configuration 63
9600 baud
eight data bits
one stop bit
no parity
no flow control
Nortel VPN Router Installation — VPN Router 1750
Get other manuals https://www.bkmanuals.com
V07_0.024
Jul 6 2006, 08:23:16
510649