Configuring The Management Ip Address - Nortel Contivity 1700 Installing Manual

Configuring the management IP address

You use the serial interface to assign the Contivity 1700 a management IP address
and subnet mask so that you can then use a Web browser for management.
To configure the management IP address using the serial interface:
1
2
3
4
Turn on the terminal or PC.
The terminal or PC should be configured as follows:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• No flow control
Connect the serial cable (supplied with the Contivity 1700) from the
gateway's serial port to a terminal or to the communications port on a PC.
On the PC, start HyperTerminal
press Enter.
The Welcome screen appears.
Welcome to the Contivity Secure IP Services Gateway
Copyright (c) 1999-2004 Nortel Networks, Inc.
Version:
Creation date:
Date:
Unit Serial Number:
Please enter the administrator's user name:
Enter the default user name and password for the administrator.
The factory default user name is admin and the default password is setup. The
user name and password are case sensitive.
Please enter the administrator's user name: admin
Please enter the administrator's password: *****
Chapter 3 Configuring the management IP interface 45
* or another terminal emulation program and
V04_90.230
July 27, 2004, 20:51:06
07/27/2004
317563
Installing the Contivity 1700