Bcm 200 Configuration; Configure Ip Address On Lan-1 Interface - Nortel 200 Technical Configuration Manual

Soho secure remote access solution with nortel vpn gateway vpn router
Hide thumbs Also See for 200:
Table of Contents

Advertisement

Technical Configuration Guide:
SOHO Secure RAS with VPN Gateway and VPN Router
V1.0
September, 2006

2.7 BCM 200 Configuration

Connect the T7208 terminal phone to the BCM 4X16 Media Bay Module (MBM). This phone is used for answering
incoming calls and making outgoing calls from/to SOHO.
Connect PC-2 to LAN-1 for managing and configuring BCM.

2.7.1 Configure IP Address on LAN-1 Interface

In order to configure the BCM using the Unified Manager, the LAN-1 IP address must be configured correctly
through a terminal to the console port using the correct serial cable. Refer to Appendix for detailed information of
BCM serial cable.
_______________________________________________________________________________________________________________________
27
External Distribution
NORTEL

Advertisement

Table of Contents
loading

Table of Contents