48 Chapter 2 Introducing the WebGUI
The MAIN MENU screen appears.
Restoring the factory-default configuration settings
If you just want to restart the Business Secure Router, press the rear panel RESET
button for one to three seconds.
If you forget your password or cannot access the SMT menu, you will need to
reload the factory-default configuration file or use the RESET button the back of
the Business Secure Router to restore the factor-default configuration. Uploading
this configuration file replaces the current configuration file with the
factory-default configuration file. This means that you will lose all configurations
that you had previously and the speed of the console port will be reset to the
default of 9600bps with 8 data bit, no parity, one stop bit and flow control set to
none. The password will be reset to "PlsChgMe!", also.
Procedure to use the reset button
Press the rear panel RESET button for longer than three seconds to return the
Business Secure Router to the factory defaults.
6
Uploading a configuration file through console port
1
2
NN47923-500
Note: The management session automatically times out when the time
period set in the Administrator Inactivity Timer field expires (default
five minutes). Simply log back on to the Business Secure Router if this
happens to you.
Reset Button on the Router; LineFeed. Press the RESET button for longer
than three seconds to return the Business Secure Router to the factory
defaults.
Download the default configuration file from the Nortel FTP site, unzip it and
save it in a folder.
Turn off the Business Secure Router, begin a terminal emulation software
session and turn on the Business Secure Router again. When you see the