Installing A Nortel Ethernet Routing Switch 5530-24Tfd In A Rear Mounted Configuration - Nortel 5500 series Installation Manual

Installing a Nortel Ethernet Routing Switch 5530-24TFD in a rear mounted configuration 23
Installing a Nortel Ethernet Routing Switch 5530-24TFD in a rear
mounted configuration
The Nortel Ethernet Routing Switch 5530-24TFD now features the option of
installing the switch in a rear mounted configuration. This option allows the
switch to be installed with the back panel facing forward.
To install the 5530-24TFD in a rear mounted configuration perform the
following tasks:
Step
1
Copyright © 2005 - 2006, Nortel Networks
.
Mounting the switch
Action
Attach a bracket to each side of the switch using a #2 Phillips
screwdriver as illustrated in
(page 24). The bracket with the round holes goes on the right side of
the switch, where the round fan vents are located.
Nortel Ethernet Routing Switch 5500 Series
Installation
NN47200-300 2.00 Standard
5.0 7 July 2006
—End—
"Attaching rear mounted switch brackets"
Nortel Networks Confidential